TIFLEN (Jiangsu) New Materials Co., Ltd.

公司新闻

行业新闻

常见问题

Introduction to Polyimide Tape

1970-01-01 6 5

Polyimide tape is based on polyimide film and uses imported silicone pressure-sensitive adhesive, which has excellent high and low temperature resistance, electrical insulation, radiation resistance, and dielectric resistance. It can be used for a long time in the high temperature range from -30 ℃ to+200 ℃. Short term use within a high temperature range of+260 ℃ without leaving any residue. Mainly used to protect gold fingers during circuit board reflow soldering; High temperature insulation protection for aircraft, spacecraft, nuclear industry, household appliances, PTC heaters; Insulation material for wires, cables, capacitors, and manufacturing bundling for mobile phone lithium batteries.

Polyimide tape KSY-JD50

Thickness and deviation (mm) ≤ 10%: 0.05

Substrate thickness: 0.025

Tensile strength (Mpa): 10-13

Elongation at break (%) ≥ 35: ≥ 40

Peel strength (adhesion N/2.5): 0.035-0.04

Breakdown voltage (KV/M): 6

Temperature resistance ℃ (3 minutes without residual glue): 260 ℃

Material: Polyimide film

Adhesive system: Silicone

Length (M): 33

Polyimide tape KSY-JD60

Thickness and deviation (mm) ≤ 10%: 0.06

Substrate thickness: 0.03

Tensile strength (Mpa): 10-13

Elongation at break (%) ≥ 35: ≥ 40

Peel strength (adhesion N/2.5): 0.06-0.07

Breakdown voltage (KV/M): 6

Temperature resistance ℃ (3 minutes without residual glue): 260 ℃

Material: Polyimide film

Adhesive system: Silicone

Length (M): 33

Polyimide tape KSY-JD85

Thickness and deviation (mm) ≤ 10%: 0.085

Substrate thickness: 0.05

Tensile strength (Mpa): 19-22

Elongation at break (%) ≥ 35: ≥ 50

Peel strength (adhesion N/2.5): 0.06-0.07

Breakdown voltage (KV/M): 10

Temperature resistance ℃ (3 minutes without residual glue): 260 ℃

Material: Polyimide film

Adhesive system: Silicone length (M): 33

Polyimide tape KSY-JD125

Thickness and deviation (mm) ≤ 10%: 0.125

Substrate thickness: 0.075

Tensile strength (Mpa): 20-23

Elongation at break (%) ≥ 35: ≥ 60

Peel strength (adhesion N/2.5): 0.06-0.07

Breakdown voltage (KV/M): 13

Temperature resistance ℃ (3 minutes without residual glue): 260 ℃

Material: Polyimide film

Adhesive system: Silicone

Length (M): 33

Polyimide tape is usually a transparent or semi transparent golden film. The surface of high-quality polyimide tape is flat and smooth, without pinholes, bubbles, or conductive impurities, and the edges are flat and undamaged.

What are the precautions for the finished packaging of Teflon tape

The packaging of Teflon tape also has strict requirements. The purpose of packaging is that after customers receive the goods, the PTFE tape will not be damaged during transportation. Due to the large daily shipment volume of PTFE tape in our company, we attach great importance to the packaging of PTFE tape. We must ensure that customers receive the goods without any issues

How to determine the material selection of PTFE tape

The selection of materials for PTFE tape is still unknown for the vast majority of customers. Many customers only know about Teflon tape and do not know which one to use. Therefore, our company has provided specialized training for sales personnel to address this situation. We will decide based on the specific equipment and usage conditions of the customer

Storage, transportation, and maintenance of Teflon high-temperature resistant conveyor belts

Precautions for storage and transportation of Teflon high-temperature resistant conveyor belts: 1. Teflon conveyor belts should be immediately stored in suitable warehouses to avoid wind, sun, and other weather conditions; Discourage immediate contact with acid, alkali, oil, and inorganic organic solvents to maintain cleanliness and dryness. 2. Non compliant types, non-standard models and specifications, compressive strength, and overlapping layers of fabric are not allowed

Maintenance and precautions for high-temperature resistant conveyor belts

High temperature resistant conveyor belts are divided into general heat-resistant and strong heat-resistant conveyor belts. The ordinary heat-resistant strong layer is made of polyester white canvas (CC56), and the strong heat-resistant strong layer is made of EP. With the popularization of conveyor belts in industrial production, multiple types, good performance, lightweight, multi-purpose, and long service life are the concerns of manufacturers at multiple levels...

Storage, transportation, and maintenance of Teflon high-temperature resistant conveyor belts

Which fields are the main applications of Teflon films

Teflon film is an oriented film made from suspended polytetrafluoroethylene resin, which is molded, sintered, and cooled into a blank, then turned and rolled. The oriented film is formed by rolling. Used to manufacture gasket sealing and lubrication materials for working in various corrosive media, as well as electrical insulation used at various frequencies